1. Get start with airplane photo in all views point, including the airplane data such as the wingspan, fuselage length, etc.

2. Drawing In Scale configuration such as, incidence, the wideness, length, height, propeller blade angle and a position of the equipment

3. Drawing Out Scale configuration such as, the angle and propeller position, including using hardware on the market and adjust Alignment to be an R/C airplane 

4. Restructure for the strength and ease to assemble by designing guide lock and interlocking parts

5. Drawing the components to find out the appropriate type of wood and thickness, arrange the parts Lay Out and then programming the CNC machine

6. Cut the components to assemble (if distorted, back to step 4 and assemble again)

7. If the prototype come out disgusting like the way the producer hopes to keep, have to get back since step 2 or 3 (during assemble will take a photograph each the step for a instruction manual), In the picture, the right hand that attached propeller spinner is modified, be at first disgusting nose portion like the expectancy keeps, (don't attaché the spinner). These minor modifying, but waste the time, but it result the prototype has a good quality, great character, the style is belong to oneself, the most important thing is not to copy the other

8. If the prototype is satisfied, then install hardware and radio system for test flight. If the flight test is not satisfied, it’s necessary to get back to the step 2-3 again. The entire process to make the perfect prototype if take time to work continuously 8-10 hours a day it will take approximately 2-3 month then succeed as intend to keep. With regard to get the great plan, perfect prototype and the copyright in the plan according to the law, it’s take time and individual ability moderately.