
The nose is designed to shaped with 40 mm. spinner |

Motor cover designed for easy to finishing with the same color scheme with the fuselage |

A plenty room for ease to install motor and adjustable motor mount as shown in the photo |

Wing center section designed as an original Caravan |

Wing center section designed as an original Caravan |

Battery hatch designed ease to access to the battery |

Wing strut with nylon clevis, make it ease to remove the wing for travel, hardwood attach to the main landing gear which you can cover with Monokote with the scheme as same as fuselage |

Servo in an opening position which is not effect to the C.G. position while loading an item |

Taper wing and wing incidence as an original Caravan with interlocking designed make you ease and accurate to assemble |

Ailerons designed as an original Caravan |

Wing Tip designed as an original Caravan |

Two 5 mm. plastic wing dowel and bolt-on wing mounting |

Bolt-on wing mounting |

Aileron servo installation designed to protrude only servo arm |