Chin Model Air Craft, The Asian manufacturer of balsa scale airplane kits

Cessna Skylane 182
Assembled by Mr. Vasu

Cessna Caravan 208B
Assemble by Mr. Thawatchai

Cessna 182
Assembled by Mr. Yai

Cessna 182
Assembled by Mr. Chakrit
(Install .09 engine)

Cherokee
Assemble by Mr. Thawatchai

Cherokee

Assembled by the women who is novice in assembling airplane kit, but there is the diligent until succeed

Cessna 182
Assembled by Mr. Kajornsak
Install .15 engine

Kit assembling example

Example of Cessna 182 airplane kit illustration and the explanation in brief, in the instruction manual have over 350 photos with fully explanation

Note: In the example photos and the steps will not continual

	Place F13 in position by lean touch with B1 (do not apply a glue on the part adjoin to B1)
	Place P8 and F6 in position
	Bevel to the line from P6, then sand smooth on both sides
	Place F 14 in position, adjust the position of a window to the center
	Adjust a position to aligned with F0 (do not apply a glue to the joint of BP1 and F0)
	Side view of the joint parts

The other model will show and advise step-by-step the way to assembles in each complicated step of such Model

	Sand the aft cabin with round sander
	Mix the provided epoxy 2:1. Brush Epoxy on all joint as shown in the photo to add strength to the joint
	Paint black enamel as shown in the photo
	With attention to the detail, you can see that the components are more thoroughly than the other
	Building completed, prepare for covering
	Building completed, prepare for covering